March TE-7SSB-MD 230/460 VAC Centrifugal Mag Drive Pump 0155-0249-0400
March 0155-0249-0400 TE-7SSB-MD magnetic drive centrifugal beer pump with a 1 HP three-phase 230/460V TEFC motor, 316 stainless steel housings and sanitary Tri-Clamp connections. Designed for compatible commercial brewing applications.
March 0155-0249-0400 TE-7SSB-MD Three-Phase Beer Pump
The March 0155-0249-0400 is a TE-7SSB-MD magnetic drive centrifugal brewing pump with a 1 HP, three-phase 230/460V TEFC motor. This configuration is designed for compatible brewery liquid transfer and hot wort circulation systems requiring three-phase electrical operation.
The pump features 316 stainless steel front and rear housings, a glass-filled Kynar impeller with carbon bushing and sanitary Tri-Clamp connections. Magnetic coupling transfers motor torque to the impeller without a conventional rotating mechanical shaft seal.
Key Features and Benefits
- Three-Phase TEFC Motor: 1 HP motor designed for 230/460V electrical operation.
- 316 Stainless Steel Wet End: Front and rear housing construction for the original brewing pump configuration.
- Sanitary Tri-Clamp Connections: Supports compatible brewery piping arrangements.
- Magnetic Drive Technology: Eliminates the conventional dynamic shaft seal.
- Serviceable Construction: Manufacturer documentation identifies individual wet end replacement components.
Commercial Brewing Applications
The TE-7SSB-MD three-phase configuration is intended for compatible brewery wort transfer, recirculation and water circulation systems. It may be integrated into process equipment where the hydraulic duty, electrical supply and sanitary connections match the original design.
Installation and Maintenance
Provide adequate liquid supply before operation because this pump is not self-priming. Avoid dry running and follow manufacturer procedures for electrical wiring and flow regulation. Disconnect power, relieve system pressure and allow hot liquid to cool before maintenance.
Replacement and Ordering Guidance
Part number 0155-0249-0400 identifies the TE-7SSB-MD complete pump with a 1 HP three-phase motor. The single-phase version uses part number 0155-0249-0300. Verify the motor phase, voltage, connection arrangement and current manufacturer configuration before ordering.
| Brand | March |
|---|---|
| Product Type | Pump |
| Inlet/Outlet Connection Type | Tri-Clamp |
| Inlet Size | 1-1/2 in |
| Material - Housing | Stainless Steel |
| Material - Impeller | Glass Filled Kynar |
| Material - Oring | EPDM |
| Motor Hz Rating | 50/60 |
| Motor Voltage | 190/380 VAC at 50Hz, 230/460 VAC at 60Hz |
| Outlet Size | 1 in |
| Max Flow | 53 gpm (200 lpm) |
| Max Head | 57.5 ft (17.5 m) |
| Horsepower | 1 |
| Max Head Range | 51 - 70 ft |
